Skip to content
All articles

Orphan Wells

Reading a well file, from permit to production history

4 MIN READ

Shawn Azdam

Founder

Layered amber file sheets over teal schematic grids on dark slate.
On this page

Every orphan well has a paper trail — or the remains of one. The drilling permit, the well logs, decades of production reports, and sometimes a plugging report that may or may not describe the well in front of you. Learning to read a well file is learning to reconstruct a century of decisions from fragments. Here is the routine, in the order the documents want to be read.

Start with the permit

The drilling permit is the well's birth certificate: location, proposed depth, target formation, operator of record, and date. Read it first because everything else in the file is measured against it. A permit for 4,200 feet with logs running to 4,800 tells you the operator deepened the hole — common, usually documented in an amended permit filed nearby. A permit location that disagrees with the current map pin by half a mile tells you the location dialects are disagreeing again, and the permit is one more vote to reconcile.

Check the operator chain attached to the permit record. Transfers, assignments, and name changes trace who owned the well and when — the paper version of the idle-to-orphan story. A file whose last transfer predates a bankruptcy by months is telling you exactly how this well became nobody's.

Logs show what was built

Well logs — the geophysical recordings run during and after drilling — describe the hole itself: casing strings and depths, cement tops, formation markers, and the shows of oil, gas, or water that justified completing the well. For plugging purposes, three log facts dominate: where the casing is set, where the cement actually went (as opposed to where the permit said it would), and which zones flowed.

Read logs skeptically. Old neutron-density tools drifted, hand-annotated strip charts smudge, and some logs in the file may belong to a neighboring well filed under the wrong API number. Cross-check depths against the completion report: when the log and the completion report agree, trust them; when they disagree, the disagreement is your first written question.

Production history shows what was taken

Monthly or annual production reports — oil, gas, water volumes — trace the well's economic life from flush production through stripper decline to silence. The shape of the decline curve tells you how the well was managed: a well produced to exhaustion and then properly shut in reads differently from one whose production stops abruptly mid-life, which usually means mechanical failure, a lost lease, or an operator who stopped filing reports before stopping production.

The tail of the production record is where orphans announce themselves. Years of zero production with no plugging report, an operator that stops filing in every state simultaneously, a final year of token volumes held open to preserve the lease — these are the signatures of a well sliding from idle toward orphan while nobody watches.

The plugging report, if you are lucky

Some files contain a plugging report: dates, plug depths, cement volumes, witnessing inspector. When present and credible, it converts the well from a liability into a monitored result — subject, as always, to post-plug verification. When absent, its absence is data: either the well was never plugged, or it was plugged without paperwork, and the field visit will have to determine which.

Treat old plugging reports as claims, not facts. Pre-1970s plugs used methods and materials that would not pass modern standards, and "plugged" wells from that era re-enter programs regularly. A plugging report narrows the uncertainty; it rarely eliminates it.

The file that lies: spotting doctored records

Most gaps in well files are entropy — fires, floods, neglect. A few are intent. Stripped pages where the transfer history should be, production reports that stop the quarter before a sale, plugging affidavits signed by interested parties with no inspector countersignature: the file occasionally shows signs of someone arranging the past. Estimators are not forensic accountants, but three tells are worth knowing. Chronology breaks — documents whose dates contradict their neighbors — flag rearranged sequences. Uniform handwriting across decades of "original" entries flags single-session fabrication. And missing counterparty records — a transfer with no corresponding filing on the other side — flag transactions that existed only on paper.

Doctored files cluster around the wells that matter most: high-liability sites where the paper determines who pays. When the file smells wrong, say so in writing — to the owner, in your questions, on the record. Bidding a well whose history was arranged is bidding a liability you cannot price. Walk away loudly enough that the owner fixes the file before the next round, and keep your notes: patterns across files from the same operator are how enforcement cases start.

What we think at Terrabillion

Well files are the industry's memory, and much of that memory is moldering in county courthouses and state archives. Every file we digitize and reconcile makes the next bid package more accurate and the next plugging job less surprising. Our position is that well files should be public, digitized, and linked to the wells they describe as a matter of course — the records were created under public regulatory authority, and locking them in filing cabinets serves no one but the status quo. Until then, we will keep reading them the slow way, half an hour at a time.

Orphan-well intel, monthly

Contact sales